See the full price ladder
F-Ball Styccobond F49 Flooring Adhesive
F-Ball Styccobond F49 Flooring Adhesive
Couldn't load pickup availability
Product Specifications
Product Specifications
F-Ball Styccobond F49 Hybrid PS is a two-part, temperature tolerant pressure sensitive adhesive that bonds PVC floorcoverings, edgings and coving where temperatures swing.
Product Details
| Brand | F-Ball |
| Product | STYCCOBOND F49 HYBRID PS |
| Type | Two-part, water-based pressure sensitive vinyl flooring adhesive |
| Pack Size | 2kg and 5kg kits, with the Base and PS Activator supplied in the correct proportions |
| Coverage | Up to 6m² per kg using a STYCCOBOND FINE NOTCH (A1) trowel, giving up to 12m² from a 2kg kit and up to 30m² from a 5kg kit. For skirting, coving and capping, up to 120 linear metres from a 2kg kit and up to 300 linear metres from a 5kg kit using a STYCCOBOND spreader |
| Suitable Floorcoverings | PVC floorcoverings in sheet and tile format, PVC edging, flexible PVC skirting, coving and capping, and PVC and PVC-backed textile floor and wall coverings |
| Underfloor Heating | Suitable for use over normal underfloor heating systems. Heating must be off for at least 48 hours before, during and after application |
| Open Time | Up to 4 hours once mixed, depending on temperature |
Key Features
- Temperature tolerant, use in ambient temperatures of -20 degrees C to +60 degrees C
- High strength and high grab
- Rapid curing
- Excellent dimensional stability
- Long open time once mixed
- Long pot life
- Water resistant, suitable for wet room environments
- Excellent plasticiser resistance
- Easy to apply
- Approved for marine use
- Approved for skirting, coving and capping
- Single surface bonding
- Low hazard, suitable for sensitive areas
- Suitable with underfloor heating
Using STYCCOBOND F49 HYBRID PS
Subfloors must be structurally sound, smooth, dry (below 75% RH) and free from contaminants, with concrete and sand/cement screeds fully cured and laitance removed. Empty all the contents of the PS Activator container into the Base container and mix with a power whisk for four to five minutes before use; pot life is up to 3 hours at 20 degrees C. Apply to the subfloor only as single surface bonding, using a FINE NOTCH (A1) trowel for floorcoverings or a STYCCOBOND spreader for skirting, coving and capping, and lay from 20 minutes once the film has dried.
Trade prices direct from Flooring Wholesale, Worthing. Nationwide delivery.
Share
