Polyflor Walnut 2553 Marquetry Strip 5mm Gauge 5x914mm Pack of 50

Polyflor Walnut 2553 marquetry strip — the trade-specified LVT inlay accessory for finishing wood and stone Polyflor floors with authentic detail. 5x914mm, 5mm gauge, pack of 50 lengths.

Product Details

About this Marquetry Strip

Laid between LVT wood planks to create a 'ship's deck' effect, perimeter border or tramline highlight.

Polyflor LVT inlay strips are cut from the same wear-layer material as the Polyflor LVT range itself, so colour, wear performance and durability all match the surrounding floor. Whether you're laying a perimeter tramline, a ship's-deck inlay between planks, or replicating authentic grout lines between stone tiles, these are the strips Polyflor specify for the job.

Choosing the Right Gauge

This is a 5mm gauge strip — use with 5mm gauge Polyflor LVT planks (deeper Colonia / Bevel Line ranges).

Polyflor strips must match the gauge of your LVT planks/tiles for a flush finish. If your tiles are bevelled, choose a gauge 0.5mm less than the tile gauge so the strip sits below the bevelled edge. If you're unsure, check your Polyflor product code or contact us with the range name and we'll confirm.

Installation

Glue down using Polyflor F44 or an equivalent acrylic LVT adhesive. Strips are laid in the gap between LVT planks/tiles during the main floor installation — they cannot be retrofitted to an existing floor without lifting tiles. As a rough guide, allow 1 pack of strips per 3 packs of LVT tiles for grouting, or 1 pack per 2 packs of LVT planks for marquetry — confirm with your fitter for the specific design.

Delivery & Trade Pricing

Trade-priced direct from Flooring Wholesale, Worthing — 30+ years in the flooring industry. Free UK mainland delivery on orders over £200. Need a different gauge, an unlisted colour, or bulk trade pricing on 10+ packs? Contact us or Request a Quote.